fischer chipboard screw Power-Fast II 6.0x300 countersunk (25 pieces, partial thread, galvanized)

Chipboard screw Power-Fast II 6.0x300 countersunk The fischer Power-Fast II FPF II CZP BC is an electrogalvanised, blue passivated screw with a partial thread and a PZ 3 Phillips drive. The electrogalvanisation does not contain any VI chrome parts and is therefore very environmentally friendly. The screw with countersunk head can be countersunk in the wood flush with the surface. The Power-Fast II with high-performance wax coating reduces the screwing torque and also allows screwing close to the edge without any problems. The chipboard screw has a significantly reduced gap behavior compared to other commercially available screws. The 70mm long partial thread allows wooden elements to be tightly pulled together. The chipboard screw is suitable for fastening load-bearing components in coated wood, hardwood, softwood and for wood connections or connections of metal parts to wood, such as metal fittings, brackets, joist hangers and other metal and wood connections. Type: Countersunk Screws EAN: 4048962373691 Manufacturer No.: 670511 Quantity: 25 pieces / pieces Material: steel, galvanized Drive: Phillips PZ, size PZ 3 Dimensions: diameter | 6mm Measurements: Length | 300mm Application examples: General. Wood connections, adding elements, door and metal fittings Suitable building materials: Wood, veneered plywood panels (e.g. multiplex), hardwood (pre-drilled), chipboard and coarse chipboard (e.g. OSB panels), plywood, softwood Feature: The increased thread pitch of the screw significantly reduces the screwing time. Additional information: The screw tip with the three ribs ensures fast biting behavior and pre-milling, and the shank milling ribs in combination with the core milling cutter geometry noticeably reduce screwing resistance. Note: The Power-Fast II is a screw with tested loads in the fischer dowel (e.g. DUOPOWER or UX)